Welcome Guest

Capella

To buy or need help call 020 8539 4188
Monday to Friday from 8:30am - 5pm
SHOPPING BASKET
Total: 0 items Amount: £0.00
Home ATM Door Detector for wrap around door (ATM 8 JS246)

Having problems?
Feel free to contact us today

Telephone: 020 8539 4188
*Call charges may apply
Opening times: (Mon-Fri 08:30am - 5pm)
Paypal image

TECHNICAL DATA

If you require more technical data regarding any of our products then please follow this link.

ATM Door Detector for wrap around door (ATM 8 JS246)

ATM Door Detector for wrap around door (ATM 8 JS246)

Model: JS246
ATM8 - Wrap Around Door Detector for ATM's and Safes, Internal Contact and solenoid. NCR, Wincor-Nixdorf, compatible.
Downloads
pdfJS246 ATM8 Datasheet(982.97 KB )Download

Be the first to review this product

Availability: In-Stock & Ready to Ship!

£397.00

Description

The ATM8 (Automated Teller Machine) vibration detector was originally designed specifically for use on the Wincor-Nixdorf ProCash 2050xe. It is now used to protect many of the main ATM manufacurers ATM's. (NCR, SIemens, Wincor-Nixdorf). The ATM8 comprises an advanced signal processing analyser (EVD –Explosion Vibration Detector) and electromechanical release mechanism housed within a robust steel enclosure. This combination offers sophisticated attack detection and controlled access to the protected unit by an authorised user.

The illustration above shows the ATM8 and its companion magnet hasp, the latter is fitted to the leading edge of the door. When the door is closed the magnet is concealed under the lid of the ATM8 and door status can be monitored. To allow access to the safe, a low-voltage DC supply is applied to the ATM8 – indicated by a green LED. The authorised user presses the release switch and the lid of the ATM8 can be opened (limited travel) thereby freeing the magnet and allowing the safe door to be opened. In addition to dual anti-tamper protection (single output), the ATM8 offers a number of additional outputs: -



  • VIBRATION. Attack by way of drilling, grinding, hammering or thermal cutting device (when operated in conjunction with a JS161, SLN) will trigger the VIB output.

  • IMPACT. Explosives, a series of consistent strikes or attempts at ram-raid will activate the IMP output instantly.

  • TILT. Any attempt to move the protected equipment will activate the TILT output. In addition, high-energy attacks such as ATM ram-raid will also trigger this output.

  • DOOR. A voltage-free contact that reports the state of the safe door.

  • SLIDE. A voltage-free contact indicating if the ATM8 cover is opened/closed.


The principle function of the ATM8 is signal processing and analysis of the various on-board sensors then to take appropriate action in the event of a legitimate attack. In addition, this unit has a number of dedicated inputs that support remote sensors that enhance and extend the area of coverage. Typical of this are products JS161, SLN (Smoke Light Noise) unit and JS195 RHD (Remote Head).

KEY FEATURES

Advanced signal-processing scheme.
Separate alarm outputs.
On-board LED indication for Signal Detect, Vibration Alarm and Impact Alarm.
Low level Impact and Explosion sense capability.
Nominal 3m2 detection zone.
Improved power consumption over earlier variants.
Extended coverage when used with remote head(s).
Sensitivity adjustment for non-standard installations.
Robust 1.2mm seam welded mild steel enclosure.
Enclosure anti-tamper.
Easy to install – no set-up required.

ELECTRICAL & MECHANICAL DATA

Analyser supply voltage: 12 Volts DC (nom)
Analyser operating voltage range: 10.5 – 15.0 Volts DC
Analyser quiescent Current: 28 mA @ 12 Volts DC
Maximum analyser current consumption: 42 mA @12 Volts DC
Solenoid supply voltage: 12 Volts DC (nom)
Solenoid operating voltage range: 10.5 – 15.0 Volts DC
Continuous solenoid current consumption: 500 mA (approx) @ 12 Volts DC
Maximum ATM8 current consumption: 542 mA (approx) @ 12 Volts DC
Please note. The power supply should be capable of handling a peak load of 1.2 A @ 12 V DC to accommodate the solenoid inrush current.
Maximum detection area: 3 m2
Operating temperature range: -10oC to +40oC
Outputs: Voltage-free contacts rated at 0.1 A @ 12 Volts DC for VIBRATION, IMPACT, TILT, DOOR, TAMPER, SLIDE
Construction: 1.2 mm seam welded mild steel
Main body dimensions (mm): 265.0 (L) x 102.0(1) (W) x 90.5(2) (D)
(1)Allow an extra 7.0 mm for hinge screw protrusion.
(2)This dimension includes the right-angle return. Also, please allow an extra 20.0 mm for the lid handle.
Hasp dimensions (mm): 78.0 (L) x 15.5 (W) x 15.5 (D)
Main body weight: 2.15 Kg
Hasp weight: 0.04 Kg
Cable entries: 2 off 16mm hinge side entry
Colour/Finish: Dark Grey / Powder coat
1 Year

Write Your Own Review

You're reviewing: ATM Door Detector for wrap around door (ATM 8 JS246)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Related Products