Welcome Guest

Capella

To buy or need help call 020 8539 4188
Monday to Friday from 8:30am - 5pm
SHOPPING BASKET
Total: 0 items Amount: £0.00
Home Remote Head Detection Zone Extender (JS195)

Having problems?
Feel free to contact us today

Telephone: 020 8539 4188
*Call charges may apply
Opening times: (Mon-Fri 08:30am - 5pm)
Paypal image

TECHNICAL DATA

If you require more technical data regarding any of our products then please follow this link.

Remote Head Detection Zone Extender (JS195)

Remote Head Detection Zone Extender (JS195)

Model: JS195
Range Dectection Expander for Capella ATM /SAFE Sensors
Downloads
pdfJS195 Remote Head Datasheet(83.47 KB )Download

Be the first to review this product

Availability: In-Stock & Ready to Ship!

£63.50

Description

The Slimline RHD (Remote HeaD) extends the zone of coverage for all variants of the EVD (Explosion Vibration Detector). This low profile model has been designed specifically for ATM’s (Automated Teller Machines) where internal space is limited. The JS195 is a passive device with no output buffering; this makes it ideal for local detection zone expansion at a very low cost.


Works in conjuction with the following Capella products:


JS163, JS164, JS173, JS174, JS168, JS222, JS200, JS201, JS248,

A typical installation example might be when the EVD is mounted on the outside of the ATM door and the Slimline RHD is mounted inside the ATM safe compartment. This allows the alarm service engineer to access the EVD without the need for entry inside the ATM. In this case, the configuration would ensure that the installation complies with BS7042. Another example is where an ATM is situated adjacent to a small Night Safe. In this case, the EVD would be fitted to the ATM and the JS195 fitted to the Night Safe. By this, equipment and installation costs would be greatly reduced.

KEY FEATURES

No installation set-up required.
Six spare wiring terminals.
Enclosure anti-tamper.
Tri-colour LED for general signalling purposes.
No installation set-up required.
Remote heads may be wired in parallel.
Robust 1.2mm seam welded mild steel enclosure.
Complies with relevant articles of BS4737 and BS7042 when used in conjunction with an EVD.
Nominal 3m2 detection zone.
One 16mm bottom entry knockout.
One 16mm rear access entry point.
CE compliant.

ELECTRICAL & MECHANICAL DATA

Note: As the remote head is a passive device it has no power requirement.
LED Supply Voltage: 12 Volts DC ±20%
Anti-tamper contact rating: 0.25A @ 12v DC
Maximum RHD’s per EVD: 2
Maximum RHD to EVD cable run: 10 meters
Recommended signal cable: Single core screened. Conductor size 7/0.2mm per core min.
Dimensions (mm): 76(L) x 76(W) x 32(D) - measurement includes the LED bezel.
Weight: 210g
Colour: RAL7024 (Grey)
1 Year

Write Your Own Review

You're reviewing: Remote Head Detection Zone Extender (JS195)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating